Voyager Cruise | Mainsail


The voyager cruise mainsail is cross cut from high quality, closely woven dacron. the sail is finished to a high specification to ensure a long useful life.

  • Sail numbers
  • 2 Camber stripes
  • Leech tell tales
  • Alloy headboard
  • Luff slides
  • Loose or bolt rope foot
  • Stainless pressed rings with webbing strainers
  • Floppy reef rings at luff
  • Low stretch leech line
  • Webbing or leather around all chafe points
  • Tapered fibre glass battens
  • Adjustable batten tension
  • 3 Step zig zag stitching on seams
  • Alloy leechline cleats
  • Reinforced patched corners and slide patches
  • Cunningham and flattener if required
  • Full length battens (optional)

HEAD – radial patch and alloy headboard with pressure slide to absorb leech loads.

LUFF REEF – radial patch, stainless steel pressed ring with webbing strainers, floppy stainless reef ring.

LEECH REEF – radial patch, stainless pressed ring with webbing strainers and alloy leech line cleat.

CLEW – radial patch, stainless pressed clew ring and flattener both with webbing strainers and leech line termination with alloy cleat.

TACK – radial patch, Cunningham eye and reinforcement for first luff slide.


By submitting this form, you confirm that you have read and agreed to our privacy policy.

© 2024 Dinghy, Keelboat and Yacht Sail Company All rights reserved.